Mini-Lambotte Bone Chisel 3mm x 200mm (Ref BS 14-237-01)

Mini-Lambotte Bone Chisel 3mm x 200mm (Ref BS 14-237-01), supplied from Fizza Surgical’s instrument range under ISO 13485:2016 quality management.

Albin Lambotte was an early-twentieth-century Belgian surgeon who pioneered modern fracture fixation. His name attaches to a family of orthopaedic instruments — most prominently the Lambotte bone-holding forceps used during open reduction and internal fixation (ORIF) of long-bone fractures. Lambotte forceps grip the bone shaft firmly during plate or screw placement; the sharp pointed tips engage cortical bone without slipping. Lengths of 19 cm, 24 cm, 28 cm, and 32 cm cover most ORIF applications. Modern Lambotte patterns are made from AISI 440 or 17-4 PH stainless for the higher yield strength required to hold large bones under reduction force.

Every instrument is forged, machined, and finished at the Sialkot facility from German-origin stainless billet — austenitic 304 / 316 grades for non-cutting, mucosal-contact, and hollow-ware lines where corrosion resistance is the priority, martensitic 420 / 440 grades for cutting and edge-retention patterns where heat-treatable hardness matters, and 17-4 PH precipitation-hardened stainless for high-load orthopedic and implant-handling applications. Polishing, passivation, and final inspection are performed in-house under documented quality procedures aligned with ISO 13485:2016.