Guides, comparisons, and technical articles about bone surgery instruments for orthopedic and trauma surgery.
An external fixator is a scaffold built outside the limb. Metal pins pass through the skin into bone above and below a fracture, and an external frame of rods and clamps locks those pins in a rigid geometry. The whole construct stabilises the break without ever opening the fracture site — which is exactly why […]
External Fixator Instrument Set: Fracture Stabilization Guide Read More »
The scrub nurse lays out the tray in the order the surgeon will reach for it: acetabular side first, then the femur. A total hip replacement is really two operations happening back to back — resurfacing the socket, then rebuilding the top of the thigh bone — and the instrument set has to mirror that
Hip Replacement Instrument Set: Total Hip Arthroplasty Tools Read More »
Tighten a cortical screw through the angled hole of a dynamic compression plate and something mechanical happens that defines modern fracture surgery: as the screw head slides down the inclined ramp of the hole, the bone fragment is dragged toward the fracture line. A 4.5 mm DCP hole is machined to allow roughly 1 mm of horizontal
Bone Plate & Screw Instruments: Plating System Guide Read More »
Which bone curettes does your OR need? Complete guide to Volkmann, Bruns, and Spratt patterns plus specialty variants for spine, dental, and ENT surgery.
Bone Curettes: Volkmann vs Bruns vs Spratt Complete Guide Read More »
Complete guide to periosteal elevators — Langenbeck, Freer, Key, Cobb, Williger, Howarth. Which patterns to stock for orthopedic, spine, ENT, and dental ORs.
Periosteal Elevator Selection: Langenbeck, Freer, Key, Cobb Guide Read More »
The 8-step sterilization protocol for bone surgery instruments — chisels, gouges, rongeurs, curettes. Why bone instruments need special handling and how to extend their service life.
Orthopedic Instrument Sterilization Protocol: Hospital CSSD Guide Read More »
