Jacobson Micro Scissors — Straight, 16 cm (16.0 cm)

A straight shaft simplifies handling in open-cavity work where the surgeon approaches the target along a clear line. Catalogue reference SC 02-507-01.

Jacobson micro-scissors are short, fine, sharp-tipped scissors used in microvascular and microsurgical procedures — most commonly under operating microscope. The pattern is similar to Iris but with even finer tips and shorter blade length (typically 18 cm overall, with very short blade). Used in coronary artery bypass vessel preparation, free-flap vascular anastomosis, and nerve repair. Straight, curved, and angled variants cover most micro-surgical needs. Tungsten carbide tip insert is standard in professional-grade variants for sustained sharpness through autoclave cycles. The pattern is named for Julius H. Jacobson II, the American vascular surgeon who pioneered modern microsurgical technique in the 1960s.

Every instrument is forged, machined, and finished at the Sialkot facility from German-origin stainless billet — austenitic 304 / 316 grades for non-cutting, mucosal-contact, and hollow-ware lines where corrosion resistance is the priority, martensitic 420 / 440 grades for cutting and edge-retention patterns where heat-treatable hardness matters, and 17-4 PH precipitation-hardened stainless for high-load orthopedic and implant-handling applications. Polishing, passivation, and final inspection are performed in-house under documented quality procedures aligned with ISO 13485:2016.