The Operating Scissors — Standard Blunt/Blunt, 14.5 cm (Ref SC 02-10-04) is part of the Fizza Surgical instrument catalogue, manufactured under ISO 13485:2016.
| Reference / SKU | SC 02-10-04 |
| Working length | 14.5 cm (145 mm) |
| Material | AISI 420 martensitic stainless steel (tungsten-carbide insert variants on TC SKUs) |
| Sterilization | Steam autoclave to 134 °C · EtO compatible |
| Quality system | ISO 13485:2016 · CE-marked (EU MDR 2017/745) · FDA-registered |
- Fergusson 140mm (14cm) Operating Surgical Scissor (SC 02-55-01)
- Ciseaux médicaux émoussés 145mm (SC 02-10-04)
- Grazil 145mm – 14.5cm Ciseaux d'exploitation (SC 02-20-02)
The cutting edge on a surgical scissors is engineered geometry: a primary bevel ground to a shallow angle for tissue penetration, a secondary edge polished to near-mirror finish for low-friction transit, and a hardness profile that keeps the edge sharp through hundreds of autoclave cycles. AISI 420 stainless tempered to 52-55 HRC covers the general-surgery range; tungsten-carbide tip inserts extend service life roughly ten-fold on high-volume patterns and resist the edge-rolling that ends standard stainless scissors after a few hundred uses. Pattern selection — Mayo for heavy fascia, Metzenbaum for delicate dissection, Iris for micro-work — turns on the tissue type the surgeon encounters. Fizza manufactures the complete scissors catalogue under ISO 13485:2016 with TC and plain-stainless variants on every premium pattern.
Manufacturing compliance is verified through ISO 13485:2016 certification (the international medical-device quality standard), CE marking under EU MDR 2017/745, and FDA establishment registration. Certificate copies and regulatory documentation are available on request for inclusion in hospital procurement files and EU technical documentation packages. Sterilization validation follows ISO 17665 for steam autoclave at 134 °C.
Reviews
There are no reviews yet.